Epoxy Floor Coatings
A good fit when a garage, laundry room or workshop slab is stained and dusty, and you want a tough, easy-to-wipe surface bonded to freshly ground concrete.
Flooring Contractor in Cedar Hill, TX - Floors Prepped Right From the Slab Up
Slabworks Epoxy Floors of Waxahachie is a flooring contractor serving Cedar Hill, TX. We grind, repair and coat concrete in garages, patios, pool decks, shops and kitchens, and we polish, stain and seal bare slabs.
Slabworks Epoxy Floors of Waxahachie does concrete floor work across Cedar Hill, from epoxy and polyaspartic coatings in garages to polished, stained and sealed slabs inside homes and businesses. We also resurface patios and pool decks and strip off old coatings that have started to let go.
Concrete floors we work on around Cedar Hill
Most Cedar Hill calls start in the garage. The floor has oil spots, a crack that keeps getting wider, or a store-bought coating peeling in strips where the tires sit. That peeling usually started underneath, because the concrete was never opened up enough for the coating to grab. So before we talk colors, I look at the bare slab with you and show you what it's doing.
Out back, it's patios and pool decks that have gone chalky, cracked or slick. Inside, some people want the bare slab polished or stained instead of covering it with carpet or tile. We also hear from shop and restaurant owners whose floors take carts, hot water and cleaning chemicals every day. It's the same work we do in DeSoto and the other cities near Waxahachie.
- Based in
- Waxahachie, TX 75165
- Hours
- Mon–Sun: 6 AM–11 PM
Floor services we offer in Cedar Hill
Commercial & Industrial Epoxy Floor Coatings
For Cedar Hill shops, warehouses and service bays where carts, pallet jacks and spills wear a plain slab down, we lay heavier systems built for daily traffic.
Garage Floor Coatings
When the garage floor has oil spots, hot-tire marks or a peeling kit coating, we grind it clean and put down a flake system that hides wear and cleans easily.
Polyaspartic Floor Coatings
Helps when you can't give up the garage or patio for long, because polyaspartic sets faster than most epoxies and holds its color better outdoors.
Metallic Epoxy Flooring
For a living room, game room or showroom where you want a poured, swirled look with depth, laid over a slab we've ground flat and repaired first.
Urethane Cement Flooring
Made for restaurant kitchens and food prep rooms, where hot washdowns, grease and strong cleaners would soften or lift a standard epoxy floor over time.
Polished Concrete Flooring
If your slab is sound and you'd like it as the finished floor, we grind and polish it to a sheen that sweeps easily and has no coating to peel.
Stained Concrete Flooring
Works well when you pull up old carpet or tile and find a slab worth keeping, giving it color that soaks into the concrete rather than sitting on top.
Terrazzo Flooring
For entries, lobbies and businesses that want a hard, polished floor with stone chips set right into it, built to take heavy foot traffic.
Basement Flooring
For lower levels and rooms below ground, we check the slab for moisture before choosing a coating, because water pushing up from below is what usually lifts these floors.
Concrete Grinding & Surface Preparation
The step most failed floors skipped. We grind away the weak top skin, glue and old sealer so the next layer bonds to clean, open concrete.
Concrete Sealing
Helps when a bare driveway, patio or garage slab soaks up stains and sheds dust, and you want it protected without changing much of how it looks.
Concrete Resurfacing & Overlays
When concrete is pitted, flaking or patched but still solid underneath, a bonded overlay gives you a fresh surface without tearing out and repouring the slab.
Self-Leveling Concrete & Overlays
For uneven slabs and low spots, especially where an addition meets the older floor, we pour a leveling layer so the new flooring sits flat.
Pool Deck Coatings & Resurfacing
When the deck around your pool is cracked, faded or slick underfoot, we repair it and lay a textured coating that gives bare feet better grip.
Concrete Floor Stripping & Removal
If an old coating, paint or tile adhesive is flaking or bubbling, we take it all the way off, because a new floor laid over a failing one goes with it.
Get a free on-site look at your Cedar Hill floor
Send the form or call, and we'll get back to you within one business day. I come out to your Cedar Hill property myself, look at the floor with you and go over the job, and the estimate is free with no obligation.
(972) 903-8033Working in Cedar Hill: permits, contractors and price
In Cedar Hill, building permits come from the city's Building Inspections office, and you can reach it at citypermits@cedarhilltx.com. I check with the office while we plan your job, so we know before we start whether the work needs a permit. If it does, we handle the permit, and the start date waits until it's issued.
Any contractor doing work that needs a permit in Cedar Hill has to be registered with the city, and that's separate from a general business license, so it's a fair thing to ask whoever you hire. Price mostly comes from the slab itself, so old coating or glue that has to come off, cracks and low spots, moisture, floor size and the finish you choose all move it.
The schedule turns on that same prep, on the cure time of the system you pick and on any permit. Your own figure comes after I've looked at the floor and gone over the job with you, the same way we work in Lancaster and Midlothian.
Why people trust us with their concrete
I started Slabworks in Waxahachie in 2013, after years on other people's crews and a childhood spent pouring and patching barn floors on our family farm. We're a flooring contractor in Waxahachie, TX, working the cities around it, and I come out to look at your floor myself. When the work gets done, I'm on the job with our crew.
Most floor failures I've seen started under the coating, so we take the extra time on grinding and repair, the same way you'd clean the metal before painting a tractor. We're licensed and fully insured, and our promise is your satisfaction, guaranteed. When you're ready, call (972) 903-8033 or send us the form and tell me what your floor is doing.
What Cedar Hill properties mean for the floor
The ground Cedar Hill sits on and the way people here use their garages, decks and shops shape how we prep and coat a slab. Here's what we look at before we pick a system.
A city on the escarpment
Cedar Hill sits at the northern edge of the Balcones Escarpment, where the Texas Hill Country starts. That describes the city as a whole and tells us nothing about your particular lot, which is why I don't guess from a map. I walk the property and look at how the ground slopes around the slab, where runoff heads, and whether the floor has settled or cracked before we talk finishes.
Garages that work like shops
Plenty of garages hold more than cars. Floor jacks, toolboxes, workbenches and dropped parts all hit the slab, and oil and brake fluid soak in when it's bare. We grind out what stains we can, fill the gouges, and lean toward a thicker system on floors that get worked on, because a thin coat chips first right where the jack stand sits.
Patios and pool decks
Outdoor concrete takes wet feet, pool water, chairs dragged across it and movement at the joints. A coating that's fine in a garage can turn slick or fade outside, so we use systems made for outdoor slabs and add texture for grip. Cracks get opened up and filled first, because a coating laid over a moving crack just shows the crack again.
Kitchens and shops in business
For restaurants, shops and other businesses, the floor has to handle daily traffic and cleaning, and the hard part is usually the schedule, not the coating. We plan the work around your hours, choose a system that stands up to the heat, grease or traffic your floor actually sees, and tell you up front which areas will be closed.
Questions Cedar Hill homeowners ask about floors
Do I need a permit to put epoxy on my garage floor in Cedar Hill?
We check with the city while we plan your job and handle any permit the work turns out to need, because the city's list doesn't name floor coatings either way. The city's permit list calls for permits on construction, alterations and repairs to a building, and says ordinary nonstructural finish work like painting, wallpaper and cabinets doesn't need one.
Can a homeowner get their own building permit in Cedar Hill?
Yes, if you own the home and live in it, the city can issue you a permit to do permitted work yourself. When our crew is doing the job, though, we take care of any permit it calls for, so that's one less thing on your list while the floor gets done.
How much does a garage floor coating cost in Cedar Hill?
I can't give you a fair number until I've seen the slab, because prep usually moves the price more than the coating does. A clean, sound floor costs less to coat than one with a peeling kit coating, deep oil stains or cracks to fill, and a flake system, a metallic floor and a polished slab each price differently.
What do I need to do to get my garage ready for a floor coating?
Clear everything off the floor, including shelves that sit on the slab, and plan to park outside until we tell you the coating is ready for tires. We do the grinding, crack repair and cleanup ourselves, so you don't need to scrub or degrease first. If an old coating is peeling, leave it, because we'll grind it off anyway.
How long until I can use my floor after it's coated in Cedar Hill?
You can use it once the coating has cured, and that time comes from the product we put down. A floor is usually ready for feet well before it's ready for tires, and I tell you both before we start. If the job needs a city inspection, it has to be requested before 4:00 p.m. the day before, so we plan for that too.
Call about your Cedar Hill floor today
We're open seven days a week, 6 AM to 11 PM, so you can call (972) 903-8033 after work or send the form whenever it suits you.